Filter
Top Products
SKUs
40764, 93752,
For technical questions, please call 1-800-444-3353. Page 5
& 91905
Unpacking
When unpacking, check to make sure all parts are included. Refer to the Assembly
Diagrams and Parts Lists at the end of this manual. If any parts are missing or broken, please
call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Installation
1. Mount the Fairlead (2) to the Mounting Frame
(1) using supplied bolts, nuts, and wash-
ers.
2. Mount Electric Winch to the Mounting Frame
(1) using Bolt (3) and Nut (6). See illustration
to the right.
3. Connect the Solenoid Output Power Lines
(short-black) (17s, 24s) to either terminal
of the Electric Winch as shown below, left.
Securely tighten nuts.
4. There are two options for mounting the so-
lenoid:
Mounting Option 1: Mounting the Solenoid to the Mounting Frame (1)
Mount the Solenoid Assembly (34) to the Mounting Frame (1) using the three
Flat Washers (20s), three Spring Washers (21s), and three Nuts (22s) as shown
below, right. Securely tighten nuts.
Mounting
Frame (1)
Winch
Fairlead (2)
The warnings, cautions, and instructions discussed in this instruction manual 29.
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
Fig2
S
o
l
e
n
o
i
d
A
s
s
e
m
b
l
y
Solenoid
Cable
Motor
Terminal