Filter
Top Products
■ A good flame should be blue with minimal
yellow tip. Some yellow tips on flames are
acceptable as long as no carbon or soot
deposits appear (Fig. 18).
GOOD
Yellow
Blue
Holes in Burner
Blue
Yellow
BAD
Fig. 18
Fig. 11
Depress
and Hold
Push
Repeatedly
Match Lighting
CAUTION
Use a LONG wooden match or a match extension.
1. Close the lid.
2. Light a LONG wooden match or use the match
extension supplied with the unit, and place
through the observation hole so the flame is
near the burner (Fig. 14).
Fig. 12
■ Observe the flame through the observation hole
(Fig. 12).
■ Flame should be blue with a hint of yellow on tips.
■ Adjust flame with
the control knob
(Fig. 13).
Fig. 13
3. Open the control knob counterclockwise to
HIGH (Fig. 15).
Fig. 14
Fig. 15
Fig. 16
Depress
and Hold
4. Depress and hold the Automatic Valve (Fig. 16).
5. After burner ignition, continue to hold the
Automatic Valve in for 8-10 seconds.
■ Adjust flame with
the control knob.
(Fig. 17)
Fig. 17
English-7