Filter
Top Products
Deli Shop Model 436 Setup Guide
4360001 23
ADJUSTING THE PRODUCT DIVIDERS
A
dd or remove product dividers to accomodate various size
p
roducts. Each tray segment can be left alone or divided into
a
s many as 6 compartments, allowing the machine to vend up to
1
2 products per level.
Proceed as follows:
1. Remove tray segment:
a. Align the carousel as shown.
b. Pull down on the spring clip to release the pin.
c. Pull the tray segment directly out from the center.
2. Adjust tray divider:
a. Loosen all the retainer screws.
b. Remove all of the metal retainers.
c. Remove the plate holder.
d. Remove, add, or move tray dividers as needed.
e. Reassemble the tray segment in the reverse order of
disassembly.
PIN
SPRING CLIP
427P0015
RETAINER
PLATE HOLDER
TRAY DIVIDER
SCREW
427P0002