Creda E010E Oven User Manual


 
1. “CREDACLEAN” OVEN LINERS (E010E)
(a) How "Credaclean" works.
The surfaces of the "Credaclean" oven liners are treated
with a special vitreous enamel which absorbs cooking
soils. At temperatures of 220°C (425°F) or above, the
special surface enables these soils to be slowly destroyed.
The higher the temperature the more effective it is.
(b) Cleaning.
In most cases normal cooking operations at 220°C (425°F)
will permit this cleaning operation to proceed during
cooking. However if higher cooking temperatures are not
used regularly, it may be necessary, in order to prevent
heavy soiling, to run the ovens without shelves or meat
pan, at a maximum setting for a couple of hours. It should
not normally be necessary to clean the "Credaclean"
panels with water. If the user feels it is desirable to do so,
wipe them over with a clean, soapy cloth, followed by a
wipe with a clean damp cloth.
2. VITREOUS ENAMEL OVEN LINERS (R010E)
Cleaning.
These can be cleaned by wiping them over with a clean,
soapy cloth, followed by a wipe with a clean damp cloth.
For more stubborn stains on the side liners use a well
soaped, fine steel wool soap pad.
Care and Cleaning
Warning: Before cleaning, please ensure that the electricity supply to the
appliance is switched off and the appliance is fully cold.
DO NOT use biological washing powder, harsh abrasives or
chemical oven cleaners of any kind as this could damage the
“Credaclean” oven liners.
MAIN OVEN SIDE LINERS
AND REAR PANEL
26