Filter
Top Products
5925 Heisley Road • Mentor, OH 44060-1833
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Retherm
Ovens
FL-2273
Rev. 2 (6/08) Page 4 of 11
OPERATING INSTRUCTIONS
HOW TO SET CONTROL:
For Timed Cook Operation
Press the SELECT button to choose the timed mode.
COOKING TIME
Press the PROBE/TIME button. The display will show
the cook/retherm time.
Use the UP and DOWN arrows to set the desired time.
Press the SET button to enter the time into the control.
COOKING TEMPERATURE
Press the COOK button and the display will show the
cook/retherm temperature.
Use the UP and DOWN arrows to set the desired
temperature
Press the SET button to enter the temperature into the
control.
NOTE: Press the OVEN TEMP button at any time to
view the actual oven temperature.
HOLDING TEMPERATURE
Press the HOLD button and display will show the
holding temperature.
Use the UP and DOWN buttons to set the desired
temperature.
Press the SET button to enter the temperature into the
control.
Press the START button and the display shows the
remaining time in the cook/retherm cycle.
NOTE: The control will beep after it times down to zero
and then automatically switches to the Hold
mode. The display will then show the hold set-
point temperature.
NOTE: Cold food is NOT to be added when unit is
operating in the HOLD mode.
1.
2.
3.
1.
2.
3.
1.
2.
3.
4.
FOR PROBE COOK OPERATION
Press the SELECT button to choose the probe mode.
PROBE TEMPERATURE
Press the PROBE/TIME button and the display will
show the probe setpoint temperature.
Use the UP and DOWN arrows to set the desired
temperature.
Press the SET button to enter the temperature into the
control.
NOTE: Press the OVEN TEMP button at any time to
view the actual oven temperature.
Press the start button and the display will show
the actual probe temperature.
NOTE: The control will beep when the probe setpoint
temperature has been reached and then automati-
cally switches to the Hold mode. The display will
then show the hold setpoint temperature.
To manually end the Cook/Retherm, Probe,
or Hold Mode:
Press the STOP button during any of the above modes and
the control will end that mode. If in the Cook/Retherm or
Probe mode, the control will automatically switch into the
Hold mode.
1.
2.
3.
ON
OFF
POWER
TIME - TEMPERATURE
MODE
SELECT
START
TEMP
STOP
OVEN
PROBE
TIMED
HEAT
COOK HOLD
SET
SETPOINTS
HOLD
PROBE
TIME
COOK
RETHERM
POWER SWITCH CONTROLPRODUCT KEYS
PROBE RECEPTACLE
OPTIONAL