Filter
Top Products
READTHE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. Forsatisfactory use of your oven, become familiar with
the various pad functions of the oven as described below,
CLOCK PADJ Used
to set the time of day.
TIMERON/OFF
PADJ Used to set or
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF pad is
used to set the
Continuous Bake
feature. /
START TIME PADJ Used
to set the desired start time
for baking & Self-Clean.
May be used with BAKE
TIME to program a delayed
bake cycle.
BAKE TIME UP and DOWN ARROW PADS-- Used along FEATURE INDICATOR LIGHTSJ
PAD-- Used to with the function pads to select oven These light to show which feature
enter the length of temperature, cook time, start time (when is in use.
the baking time. programming an automatic start time), time BAKE PADJUSed
. of day, clean time and minute timer. / // to select the bake
__ e'_ ' ::__ function.
BROIL PADJ Used to
.... ....................... .//select the variable broil
@ _ ::::_:i function.
® O • Oven Q
OVEN, PREHEAT & DOOR LOCKED LIGHTS* J The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
SELF-CLEAN PADJ
Used to select the Self-
Cleaning cycle. A 2 or 3
hour Self-Clean time may
be selected.
CLEAR/OFF PADJ Used to clear
any function previously entered
except the time of day and minute
timer. Press CLEAR/OFF to stop
cooking. Also the CLEAR/OFF pad
is used to activate oven door lockout
setting.
*Note: The OVEN indicat0r light on the electronic display will turn ON and OFF when using the Bake feature and dudng
preheat: This is normal and indicates that the oven is cYc!ing t0 maintain the se!ected baking temperature: when the
preheat indicator light turns OFF, your oven is ready:
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold _. After 7 seconds, the control will beep once. This will block the controls from
sounding
when a pad is pressed. To return the sound, press and hold _") again for 7 seconds until the control
beeps
once.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press _. " "appears in the
display.
2. Press and hold the ,/_ until "HI" appears in the display.
3. Press and hold _ until °F or °C appears in the
display.
4. Press the A or V to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.