Filter
Top Products
10
5. Plug the power cord of the Smart Stick
®
Hand Blender into an
electrical outlet.
6. Put one hand on the cover of the chopper/grinder attachment,
while gripping the Smart Stick
®
Hand Blender motor body handle
with the other. Press the High or Low button with your fingers to
start the motor and run the chopper/grinder.
To turn the unit off, remove your fingers from the selected button.
7. WHEN THE BLADE STOPS MOVING, unplug the Smart Stick
®
Hand Blender, remove the motor body from the chopper/grinder
cover, and remove the cover from the prep bowl.
WHISK ATTACHMENT
1. Align the end of the whisk (A) with the small opening
of the whisk gearbox (B).
2. Push end into opening until it locks into position (C).
3. Align the motor body with the assembled whisk
attachment and slide the pieces together until
you hear and feel the pieces click together.
It may be helpful to press the release button
when assembling.
4a.
4b.