Filter
Top Products
19
To clean the inside of the
detachable stem, slide the
stem release button on the
side up as far as it will go
and hold it there as you run
water through the stem.
IMPORTANT: Never store
any blade or disc on the
motor shaft. No blade or
disc should be placed on
the shaft except when the
processor is about to
be used.
FOR YOUR SAFETY
Like all powerful electrical
appliances, a Premier
™
Series Food Processor
should be handled with
care. Follow these guide-
lines to protect you and
your family from misuse
that could cause injury.
Handle and store metal
blades and discs carefully.
Their cutting edges are
very sharp.
Always place discs on flat
stable surface before con-
necting detachable stem.
Never put blades or discs
on the motor shaft until
the work bowl is locked
in place.
Always be sure that the
blade or disc is down on
motor shaft as far as it
will go.
Always insert chopping
blade and dough blade in
the work bowl before
putting ingredients in bowl.
When slicing or shredding
food, always use the
pusher. Never put your
fingers or spatula into
feed tube.
Always wait for the blade or
disc to stop spinning before
you remove the pusher
assembly or cover from
the work bowl.
Always unplug the unit
before removing food,
cleaning, or putting on or
taking off parts.
Always remove work bowl
from base of machine
before you remove
chopping blade or
dough blade.
Be careful to prevent the
chopping blade from falling
out of the work bowl when
emptying the bowl.
Remove it before tilting
bowl, or hold it in place
with your finger, a spatula
or a spoon.
SOME TECHNICAL
DATA
The motor in your food
processor operates on
standard line operating
current. The appropriate
voltage and frequency for
your machine are shown
on a label under the base.
An automatic, temperature-
controlled circuit breaker
in the motor ensures
complete protection against
motor burnout. If the
processor runs for an
exceptionally long time
when chopping, mixing or
kneading a thick or heavy
mixture in successive
batches, the motor may
overheat. If this happens,
the processor will stop.
Turn it off and wait for
the motor to cool before
proceeding. It will usually
cool within 10 minutes. In
extreme cases, it could
take an hour.
Safety switches prevent
the machine from operating
when the work bowl or the
cover is not locked into
position. The motor stops
within seconds when the
motor is turned off, and a
fast-stop circuit stops it
instantly when the pusher
assembly is removed.
Cuisinart
®
Premier
™
Series offers a Three Year
Limited Warranty on the
Entire Machine.