Cuisinart EM-300 Espresso Maker User Manual


 
3
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD USE
ONLY
WARNING: RISK OF FIRE OR
ELECTRIC SHOCK
The lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
fire or electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
SPECIAL SAFETY
INSTRUCTIONS
1. Use only cold water in the water reservoir.
Do not use any other liquid.
2. Never use the machine without water in it.
3. Scalding may occur if the brewing head is
opened during brewing cycle.
NOTE: For safety reasons it is recommended
you plug your Cuisinart appliance directly into
the power outlet. Use in conjunction with a
power strip or extension cord is not
recommended.
SPECIAL CORD SET
INSTRUCTIONS
A short power-supply cord is provided to
reduce the risks resulting from becoming
entangled in or tripping over a longer cord.
Longer extension cords are available and may
be used if care is exercised in their use.
If a long extension cord is used, the marked
electrical rating of the extension cord must be
at least as great as the electrical rating of the
appliance. The extension cord should be a
grounding-type 3-wire cord, and the longer
cord should be arranged so that it will not
drape over the countertop or tabletop where
it can be pulled on by children or tripped over.
NOTICE
If you have a
die-cast metal unit,
for your protection
it is equipped with
a 3-conductor cord
set that has
a molded 3-prong
grounding-type
plug, and should
be used in combi-
nation with a
properly connected
grounding-type
outlet as shown
in Figure A.
If a grounding-type outlet is not available, an
adapter, as shown in Figure B, may be
obtained so that a 2-slot wall outlet can be
used with a 3-prong plug. As shown in Figure
C, the adapter must be grounded by
attaching its grounding lug under the screw of
the outlet cover plate. NOTE: Do not remove
the grounding prong.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
A.
Circuit Grounding
Conductor
Connected
Properly
Grounding
Prong
B.
Adapter
Grounding Lug
C.
Cover
Mounting
Screw
Cover of
Grounded
Outlet Box