Filter
Top Products
27
warning
To prevent electrical shock and/or personal injury, make •
certain that the oven and the light bulb are cool and
that power to the oven has been turned off at the circuit
breaker panel or fuse box before replacing a light bulb.
Always make sure the lens cover is in place when •
using the oven. The lens cover protects the light bulb
from breakage caused by high oven temperatures or
mechanical shock.
Replacing the lens cover without lining up the cut-out •
with the light socket will damage the light fixture.
Do not use a screwdriver to remove the lens cover.•
important
Do not touch the replacement halogen light bulb with your
fingers. Halogen bulbs are sensitive to the oils from your
hand. The oils from your hand will stick to the bulb and
may cause it to burn out faster than normal.
Light bulb replacement is considered to be a homeowner
maintenance operation. If the lights do not work, before
replacing them, please consult the Problem Solution
Guide on page 28.
To replace a light bulb:
Replace the light bulb(s) only with Dacor part number 1.
100429. See the facing page for ordering information
Turn off power to the oven at the circuit breaker panel 2.
or fuse box.
Hold your hand under the lens for support and pry it 3.
loose using a spatula or table knife. Pull the lens cover
straight out.
Care and Cleaning
Grasp the old bulb and pull it straight out of the 4.
socket.
Using a glove, insert the new bulb into the socket.5.
As you reinstall the lens cover, line up the cutout on 6.
the inside rim with the light socket. Gently press it
into its original position.
Turn the power to the oven back on.7.
Reset the clock (see page 8).8.
Light
bulb
Light
socket
Cutout on inside
rim of lens
Replacing the Light Bulb(s)