Dacor ER30D-C Ventilation Hood User Manual


 
6
7
Getting to Know Your Range
BACKGUARD: Some versions of the range come with a three (3)
inch backguard installed. It protects the wall from the effects of
heat and splattering grease. An optional six (6) inch and a nine (9)
inch backguard are also available.
SPILL TRAY: The spill tray catches any food that falls through the
cooktop grates.
GRATES: The porcelain coated cast iron grates support the
cooking utensils during cooking. They are removable to allow the
area below and around the burners to be cleaned easily. The size
and location of the grates depends on the model of the range.
About the Cooktop
BURNERS: The size and location of each burner depends on
the range model. The range generates a spark to light the burner
when you turn the knob to “ON”. Gaskets around the underside
of the burner bases prevent spilled liquids from leaking into the
range’s internal parts.
BURNER CONTROL KNOBS: Use the knobs to turn on the
burners and adjust the flame size. The corresponding knob
illuminates when a burner is on.
TRIM RINGS: Located behind each knob. They prevent liquids
from getting into the range’s internal parts.
Special Cooktop Features
Perma-Flame™: The Perma-Flame instant re-ignition feature
automatically re-lights a burner quickly if it goes out. With Perma-
Flame, your cooking experience is uninterrupted because the
flame is re-ignited at the same level as when it went out.
Smart Flame™: Smart Flame technology reduces the
temperature under the fingers of the porcelain-coated cast iron
grates. Smart-Flame extends grate life and protects the finish.
SimmerSear™: The crown burner is equipped with Dacor’s
exclusive precision burner control system. It allows you to cook
with a wide range of heat settings, from simmer to sear.
Spill Tray
Burner Control
Knob
Burner
Grate
Backguard
Trim Ring
Burner Locations
2000 to 8500 BTU Stack Burner
2200 to 16000 BTU Stack Burner
1000 to 18000 BTU Crown Burner
A.
B.
C.
Model ER30D Model ER30DSR