Filter
Top Products
31
Problem Solution Guide - (continued)
Problem May Be Caused By What to Do
Oven goes into hold mode too
quickly after meat probe is
connected.
Meat probe connector is still wet
after cleaning.
Dry the metal portion of the plug that con-
nects to the oven using a soft dry rag.
Cooling fan continues to run
after oven has been turned off.
Normal operation. The cooling fan may run for a while after the
oven is turned off, until the internal parts have
cooled.
Time on display not correct. Time of day not set. Set time. See page 8.
Power failure or power was turned
off.
Reset time. See page 8.
Cannot set clock. Oven in use. Clock cannot be set
while oven is in use.
Turn off oven to set clock.
Time ashes on display. Power failure or power was turned
off.
Reset time. See page 8.
Control panel does not “beep”
when touching the keys on the
control panel and when the
timer runs down to zero.
Control panel tone (“beep”) is set
to off.
Turn control panel tone (“beep”) on. See page
8.
Error code appears and stays
on display, for example “U55.”
An error code having a letter with
a number following it that appears
and stays on the display indicates
a problem that cannot be resolved
by the customer.
Call for service.
Before You Call for Service
Part and Accessories
Description Dacor Part Number
Halogen light bulb (12 Volt, 20 Watt) 100429
Meat probe 72723
Standard broil pan 82107
Grill for standard broil pan 82108
30 Inch standard type oven rack 106992
30 Inch GlideRack type oven rack 701464*, ARGO30H**
Large capacity roast/broil pan with “V” shaped rack AORPVR
Pizza baking stone ABS16
Cookie sheets, 30 inch*** (3 per carton) Contact Dacor
* Use this number for ordering a replacement under warranty.
** Use this number for ordering additional racks, not covered under warranty.
*** Dacor full size cookie sheets maximize oven rack baking capabilities by utilizing the total usable rack space.
To order parts or accessories, contact your Dacor dealer or visit www.everythingdacor.com