Filter
Top Products
PAGE 5 OF 15
Introduction.
Congratulations on the purchase of this quality refrigerator.
We trust that you will enjoy many years of trouble free use. Please read these instruc-
tions carefully as they will provide you with information on how to operate and care for
your refrigerator in order that you gain the maximum benefit from it.
Unpacking.
Do not connect the refrigerator to the power supply until all packing and transit protec-
tors have been removed.
Please memorise the position of accessories so that after unpacking and cleaning, they
may be repositioned correctly.
Please ensure that packaging material is disposed of in a responsible manner. Plastic
bags should be cut up to prevent children playing with them and accidentally suffocat-
ing.
If the refrigerator is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.
Allow the refrigerator to stand upright for at least 1/2 an hour before switching on the
power. This will allow fluids in the system to settle.
Installation.
The appliance should be positioned in a dry, well aired place, and away from heat
sources such as stoves, geysers and direct sunlight.
We do not recommend locating the refrigerator in an outdoor environment.
Allow an unobstructed air space at the sides and top of the refrigerator for ventilation
purposes. (fig 3)
Fit the two plastic wall spacers (supplied) to the condenser at the rear of the refrigerator
by rotating them 1/4 turn. (fig 4)
It is essential to level the unit by turning the two adjustable levelling feet at the front of
the unit either in or out. (fig 5)
It is advisable to adjust the cabinet so that it tilts slightly backwards. This will assist the
door to close and help the magnetic gasket maintain a good seal.
Electrical installation.
This refrigerator must be earthed and the manufacturer and the seller do not accept
responsibility for any damage due to incorrect electrical connection.
The refrigerator must be connected to a 220-250V –50Hz electricity supply via a 15A-
3 pin plug and an earthed wall socket in a readily accessible position.
If the mains power cord is damaged, it must be replaced by a qualified electrician.
We do not recommend the use of adapter plugs or extension cords.