Defy Appliances C375 Refrigerator User Manual


 
PAGE 6 OF 15
Operation
 Switch on the power at the wall plug.
 The compressor will run.
 The interior light will switch on when the refrigerator door is opened.
Setting the operating temperature
 The freezer compartment temperature can be set on the control panel.
 The temperature of the fridge compartment depends on the amount of air flowing
from the freezer compartment. This air flow may be regulated by turning the knob
on the rear wall of the refrigerator compartment. (fig 6) 1 being the warmest setting
and 5 being the coldest.
Control panel functions
A) Focus cool
 Press the Focus Cool button (a) to activate fuzzy cooling of the refrigerator.
 The focus cool icon (h) will light up.
 Focus cool automatically reacts to rapid temperature changes in the refrigerator com-
partment such as when the door is opened or when a large amount of food has been
placed in the refrigerator. Focus Cool aims to preserve and protect the stored food
against these sudden temperature changes.
 Provided it has not been deactivated, Focus Cool will automatically resume after a
power outage. This is particularly advantageous as power interruptions can be detri-
mental to cold storage.
 To deactivate the Focus Cool function, press the Focus Cool button (a) once more.
b) Freezer set
 The freezer temperature may be adjusted by pressing the Freezer Set button. (b)
 The first time the button is pressed the current set temperature is shown on the display.
Thereafter, each time the button is pressed a new freezer set temperature will be dis-
played in the following sequence: -18, -20, -22, -24, -18,…
 The Freezer Set temperature will blink in the display for 5 seconds only, thereafter the
actual freezer temperature (f) will be shown.
c) Eco Fuzzy
 Press the Eco Fuzzy button (c) to operate the refrigerator in the most economical
mode using fuzzy algorithms.
 The Eco Fuzzy icon (j) will light up.
 Provided it has not been deactivated, Eco Fuzzy will automatically resume after a
power outage.
 To deactivate the Eco Fuzzy function, press Eco Fuzzy button (c) once more.