Filter
Top Products
PAGE 10 OF 12
PROBLEM
The plates do not work
Remember that you may be charged for a service call even during the warranty period if the
fault is due to or caused by the above.
Before calling a service technician to assist with a problem,
SOLUTION
Check there is power to the wall switch.
Since the following are not factory faults, they are the owner’s responsibility.
• Damage to exterior finish.
• Breakage of glass and other components.
• Damage through improper use or installation of the appliance.
• Damage caused by moving the appliance.
Did you remember to fill in the purchase details below?
Owner’s responsibility
Problem check
Record in the space below the listed information for future reference. The serial number
may be found on the label attached to the hob base.
SERIAL NUMBER..
DATE OF PURCHASE...
PURCHASED FROM..
.