DeLonghi 10.13 Coffeemaker User Manual


  Open as PDF
of 24
 
12
5. Press the button to conrm and exit.
Statistics function
This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (g. 8) until “Statis-
tics” is displayed;
3. Press the button;
4. Press the HOT MILK or LATTE button (g. 8) to verify:
- how many coees have been made;
- the total number of cappuccinos and milk based coees
made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener lter has been re-
placed.
5. Press the MENU/ESC button twice to exit the menu.
MAKING COFFEE
Selecting the coee taste
he appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 9) repeat-
edly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, press the
button (g. 10) until the message corresponding to the
required quantity of coee is displayed:
Coee selected Quantity in cup (ml)
MY COFFEE Programmable:
from ≃20 to ≃180
SHORT
≃40
STANDARD
≃60
LONG
≃90
EXTRA LONG
≃120
Customising the “my coee” quantity
The appliance is set by default to automatically deliver 30 ml
of “my coee”.
To modify this quantity, proceed as follows:
1. Place a cup under the coee spouts (g. 14).
2. Press the button (g. 10) until “MY COFFEE”
is displayed.
3. Keep the button (g. 11) pressed until the message
“1 MY COFFEE Program quantity” is displayed and coee
delivery begins. Release the button.
4. As soon as the coee in the cup reaches the required level,
press the button (g. 11) again.
The quantity of coee in the cup has now been programmed.
Adjusting the coee mill
The coee mill is preset in the factory to make coee correctly
and should not require adjusting initially.
However, if after making the rst few coees you nd that the
coee is too thin and not creamy enough or that delivery is too
slow (a drop at a time), this can be corrected by adjusting the
grinding adjustment dial (g. 12).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied creamier coee on the
other hand, turn one click anticlockwise
towards “1” (do not turn more than one
click at a time otherwise the coee could be delivered a drop
at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Tips for a hotter coee
For a hotter coee, before delivery you are recommended to:
• perform a rinse cycle by selecting the “Rinsing” function in
the settings menu (page 10)
• warm the cups with hotwater(using thehot water
function);
• increasethe coee temperature inthe settings menu
(page 11).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Place coee beans in the coee bean container (g. 13).
 previous next