Filter
Top Products
14
TELESCOPIC SLIDING SHELF SUPPORTS
The telescopic sliding shelf supports make it safer and easier to insert and remove the
oven shelf and tray. They stop when they are pulled out to the maximum position.
Important! When fitting the sliding shelf supports, make sure that you fit:
■ The slides to the top wire of a rack. They do not fit on the lower wire.
■ The slides so that they run out towards the oven door.
■ Both sides of each pair of shelf slides.
■ Both sides on the same level.
To fix the sliding shelf support onto the side racks:
■ Screw the side racks onto the oven walls interposing the catalytic panels (fig. 9).
■ Fit the sliding shelf support onto the top wire of a rack and press (Fig. 15). You
will hear a click as the safety locks clip over the wire.
IMPORTANT NOTE: when cooking with the rotisserie DO NOT position
the grill tray on the sliding shelf supports.
Left
Right
Figure 15