4) Plug the unit into a 120V/60Hz AC only outlet.
Press the I button (11) to switch the unit on.
Note: The food processor will not work if the bowl and lid are
not fitted properly.
5) Use the pulse control (9) for short bursts. The pulse will
operate for as long as the lever is held down. The pulse
control is indicated by the letter P.
6) Turn the unit off and unplug it before removing lid,
attachments and bowl. To remove the bowl, turn it in a
counterclockwise direction. To remove the detachable drive
shaft from the bowl, just pull the shaft down.
OPERATING YOUR FOOD PROCESSOR (cont)
Figure 2
Note: Do not grind coffee beans or other food items of a
similar texture in the main bowl of the food processor. When
adding flavoring mixtures, avoid contact with the plastic as this
may result in permanent staining.