Filter
Top Products
22
DISPLAYED MESSAGES
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
correctly, pushing it as far as it will go
until it clicks into place (fig. 3).
EMPTY GROUNDS
drip tray, clean and replace (fig. 23).
Important: When removing the drip tray,
the grounds container must be emptied,
even if it is not completely full. If this
is not done, when you make the next
coffees, the grounds container may fill
up more than expected and clog the
machine.
GROUND TOO FINE
alternating with...
insert water spout and
delivered too slowly or not at all.
grinding adjustment knob (fig. 10)
one click clockwise towards “7” while
the coffee mill is in operation. If after
making at least 2 coffees delivery is
still too slow, repeat the correction
procedure, turning the grinding
adjustment knob another click (see the
section “Adjusting the coffee mill” on
page 13). If the problem persists, press
the button and deliver a little
water from the spout.
INSERT GROUNDS
has not been replaced.
grounds container.
ADD PRE-
been selected without placing any pre-
ground coffee in the funnel.
deselect the “pre-ground” function.
“Descaling” section (page 16) needs to be
performed as soon as possible.
quantity of pre-ground coffee.
FILL BEANS
as described in the section “Cleaning the
pre-ground coffee funnel”.
INSERT INFUSER
cleaning.
section “Cleaning the infuser”.
as it will go.
thoroughly, as described in the section
“Cleaning and maintenance”. If the
message is still displayed after cleaning,
contact a customer services.
REPLACE FILTER
described in the section “Water softener
filter”.