DeLonghi ECAM26455M Coffeemaker User Manual


  Open as PDF
of 23
 
12
displayed;
4. Press the button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.
Cup lighting
This function enables or disables the cup lighting. The lighting
is enabled by default.
The lights come on each time coee and drinks with milk are
made and during each rinse cycle.
To disable or re-enable this function, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until “Cup
lighting” is displayed.
3. Press the button. “ Disable?” or “ Enable?” is
displayed;
4. Press the button to enable or disable the cup
lighting;
5. Press the MENU/ESC button to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as previously set).
To reset the default values, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until
“Default values” is displayed;
3. Press the ; button
4. The message “Conrm?” is displayed.
5. Press the button to conrm and exit.
Statistics function
This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until
“Statistics” is displayed;
3. Press the button;
4. Press the MILK or CAPPUCCINO button (g. 8) to verify:
- how many coees have been made;
- how many times the machine has been descaled;
- the total number of liters of water delivered;
- how many times the water lter has been replaced;
- the total number of drinks made with milk.
5. Press the MENU/ESC button twice to exit the menu.
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
button (g. 9)
repeatedly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee.
To select the quantity of coee, press the button
(g. 10) until the message corresponding to the required
quantity of coee is displayed:
Coee selected Quantity in cup ( oz./ ml)
MY COFFEE Programmable:
from ≃0.68/20 to ≃6/180
ESPRESSO
≃1.35/40
STANDARD
≃2/60
LONG
≃3/90
EXTRA LONG
≃4/120
Customising the “my coee” quantity
The appliance is set by default to automatically deliver 1  oz./
30 ml of “my coee”.
To modify this quantity, proceed as follows:
1. Place a cup under the coee spouts (g. 14).
2. Press the button (g. 10) until “MY COFFEE”
is displayed.
3. Keep the button (g. 11) pressed until the message
“1 MY COFFEE Program quantity” is displayed and coee
delivery begins. Release the button.
4. As soon as the coee in the cup reaches the required level,
press the button (g. 11) again.
The quantity of coee in the cup has now been programmed.
Adjusting the coee mill
The coee mill is preset in the factory to make coee correctly
and should not require adjusting initially.
However, if after making the rst few coees you nd that the
coee is too thin and not creamy enough or that delivery is too
slow (a drop at a time), this can be corrected by adjusting the
grinding adjustment dial (g. 12).
Please note!
The grinding adjustment dial must only be turned when the
 previous next