Filter
Top Products
•Pour in the liquid ingredients before the solid ones, as long as
the recipe doesn’t say otherwise. The liquid will facilitate the
processing and will allow for the use of lower speed. Always
add a cup of water before processing ice.
• Blend for 5 – 30 seconds and then check the consistency.
Continue to process the ingredients in this way until the
desired consistency is obtained. Be sure to not process the
ingredients too much; this would cause a loss of consistency to
the entire recipe.
•Always use the blender with the lid well inserted.
• DO NOT remove the blender jar from the motor housing
while the appliance is in use.
• In order to avoid the possibility of injury to the user or damage
to the appliance, do not insert hands or utensils into the jar
while the appliance is operating. It is possible to utilise a spatu-
la while the appliance is turned off.
2 Solid ingredients
• It is necessary to pay particular attention during the processing
of fine ingredients. In this case, it is necessary to interrupt the
processing from time to time, take off the lid and scrape the
ingredients down off the sides of the jar and the blades. Then
reinsert the lid and continue processing. If the processing
becomes lengthy in this way,select a higher speed.
•To add solid ingredients to the blender jar, remove the measur-
ing cup from the lid and add them a little at a time through the
hole in the lid. The vegetable and cheese ingredients must
always be cut into cubes before being added to the jar.
3 Hot preparations
It is always necessary to remove the measuring cup from the lid
before beginning the preparation of hot recipes.
• Slowly add the hot ingredients, maximum 2 cups at
a time, through the hole in the lid.
Cleaning and Maintenance
•Always pull out the main plug before any cleaning operation
and allow the appliance to cool down.
•Never dip the appliance into water or hold it under running water.
•Wipe down the casing with a moist cloth only.
• Remove the plates for cleaning after they have cooled down.
Use a damp cloth and a non -abrasive cleaning detergent. Rinse
and dry thoroughly. The plates are the only detachable parts
that can be cleaned separately.
•Never use sharp or pointed objects or any abrasive cleaning
agents for cleaning purposes.
• DO NOT IMMERSE IN WATER.
Blender KF8150M
5