Deni 14330 Kitchen Utensil User Manual


 
1
Professional Food Slicer
Unplug from outlet when not in use, before putting on
or taking off parts and before cleaning.
Avoid contacting moving parts. Never slice food by
hand. Always use completely assembled slicer with
platform and pusher.
Do not use an extension cord with this unit. However, if
one is used, it must have a rating equal to or exceeding
the rating of this appliance.
Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
Do not handle plug or appliance with wet hands.
Keep hair, loose clothing, fingers, and all body parts
away from openings and moving parts.
Turn off all controls before unplugging.
The Deni Food Slicer has a polarized plug (one blade is
wider than the other). This plug will fit in a polarized
outlet only one way, as a safety feature. Reverse the
plug if the plug does not fully fit in the outlet. Contact a
qualified electrician if it still does not fit. Do not attempt
to defeat this safety feature.
This unit is recommended for household, indoor use
only.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using this electrical appliance, safety precautions
should always be observed, including the following:
Read all of the instructions.
Do not leave appliance when plugged in. Always
unplug from outlet when not in use.
Do not use unit continuously for more then 10
minutes.
Do not use outdoors or on a wet surface.
Do not allow children near appliance. Close
supervision is necessary when used near children.
Use only as described in this manual with provided
attachments.
Do not use with damaged cord or plug. If the
appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water, return it to Keystone Manufacturing Company,
Inc. for proper service, replacement, or repair.
Do not do the following: pull or carry by the cord,
use cord as a handle, close a door on cord, pull cord
around sharp edges or corners, let cord hang over
edge of counter, operate appliance over cord. Keep
cord away from heated surface.
To protect against risk of electrical shock, do not put
the motor in water or any other liquid.