Filter
Top Products
4
How To Operate
To set the digital clock:
1. Plug the steamer into a wall outlet. The display will
show the time.
2. Adjust the clock to the current time by pressing the
+/- buttons. Note: the time will increase in 10 minute
intervals and decrease in 1 minute intervals.
3. Press the
“Program” and On/Off buttons at the same
time. A beep will sound.
4. Increase or decrease the steaming time by pressing the
+/- buttons. Note: the time will increase in 10 minute
intervals and decrease in 1 minute intervals.
5. Press the “Program“ button to set the steaming time.
Immediate Steam Mode:
1. Push the On/Off button until the display shows 45.
2. Set the steaming time by pressing the +/- buttons. The
time will change in 5 minute intervals. Press any button
to stop the procedure.
3. After the steaming time is set, the unit will sound for 2
seconds and the red indicator light will illuminate. The
clock will begin to count down.
4. When setting the time to 0, the electric timer will return
to the clock mode automatically. The maximum steaming
time is 90 minutes.
5. When steaming, press the +/- button to change the set
time. Press the
On/Off to stop the steam process. The
display will return back to clock mode.
Timing The Steam Mode:
1. Press the “Program” button. The display will blink and
“Prog” will appear on the upper left of the display.
2. Set the time by pressing the +/- button. The time will
increase and decrease in 10 minute intervals.
3. Press the “Program” button until the display shows 45.
Press the +/- button to adjust the steaming time.
4. Press the “Program” button again. The display will show
the time and “Prog”. This indicates the start of the timing
steam mode.
5. When the start time is reached, the unit will sound, the
red indictor light will illuminate and the steamer will
begin to steam.
6. If you want to cancel the timing steam mode, press the
“Program” button. This will return the unit back to the
clock mode.
At the end of steaming:
1. The steamer will automatically go into a hold mode after
the steaming time is finished.
2. The display will show the time and a holding symbol.
The green indicator light will illuminate.
3. The hold mode will warm for 2 minutes every 8 minutes,
after the unit stops steaming.(You will hear a click when
the unit turns on and off.)
4. To cancel the hold mode, press the
On/Off button. The
display will return to the clock mode.