Filter
Top Products
13
A-DV54
EN
ADVAnceD menu controls
Display Example Mode Description
All
Shows version of installed firmware.
All
Shows the serial number of the device.
All
SmartCode
TM
is used for therapy management
reporting; therapy information is encoded in a series
of letters and numbers, and includes a special
character for error checking to ensure accuracy.
Intellipap Enable Menu List
The Enable menu is available in all modes and is a sub-menu that allows you to control
various functions of your IntelliPAP. It is accessed by pressing the down button while in this
Advanced Menu.
Display Example Description
This option controls the Auto-ON feature, which automatically
starts the flow of air after breathing once or twice into the
mask.
This option controls the Auto-OFF feature, which
automatically stops the flow of air after taking off the mask.
The device may require up to 30 seconds to turn OFF
depending on the kind of mask used.
This option controls the mask fit check feature. The air flow to
your mask is constantly measured and if the amount of airflow
exceeds 95 liters/minute for more than 10% of the time used,
a notification will be created. This notification will be displayed
the next time you use the IntelliPAP.
Pressing the up key exits the Enable menu.
Serial Number
HD123456
Firmware Version
V0.01 01/06/2006
Auto-ON
Enabled
Auto-OFF
Enabled
Mask Fit Check
Enabled
Exit Menu
Press
SmartCode
FF28D9