Dualit DCT 2 Toaster User Manual


 
Thank you for purchasing the Dualit
Conveyor toaster. This hardworking
and versatile machine will provide
fast and efficient toasting where large
quantities of toast or toasted bread
products are required.
CAREFULLY READ ALL
THE INSTRUCTIONS
BEFORE USING THE
CONVEYOR TOASTER
AND KEEP IN A SAFE
PLACE FOR FUTURE
REFERENCE.
Before connecting, check that the
voltage on the rating label is the
same as the main supply.
Do not use outdoors
Burgers/meat products must not be
cooked/heated in his machine.
Use the correct replacement for
detachable fuse. Never use a plug
without the fuse cover fitted. Ensure
replacement fuse is the same current
value as the original. Replacement
fuses should be approved to BS 1362.
Do not leave the appliance
unattended when toasting.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
person in order to avoid a hazard
CCAAUUTTIIOONN::
DO NOT OPERATE
UNIT WITHOUT CRUMB TRAY
AS THIS CAUSES OVERHEATING IN
THE CONTROL BOX.
SAVE THESE INSTRUCTIONS
To protect against electrical shock, do
not immerse any part of this product
in water or other liquid or to be
sprayed/splashed with water.
Unplug from outlet or disconnect
from supply when not in use.
Allow to cool before: cleaning,
removing or installing parts.
Do not operate this appliance
with a damaged cord or plug.
Do not allow cable to touch hot
surfaces or to hang over the edge
of a table or counter top.
When in use a fire may occur if the
toaster is touching flammable
material. If using close to a wall,
ensure this is clad with a non-
combustible material and adheres to
fire prevention regulations.
DDUUAALLIITT CCOONNVVEEYYOORR TTOOAASSTTEERR
1
IMPORTANT SAFEGUARDS