Filter
Top Products
Unpack the unit and components from
the shipping container.
Remove all visible packing material, and
those from inside the cooking chamber.
A quick guide is included. We recommend
this is displayed where the machine is to
be used as a reference for users.
If any damage is discovered, contact
Dualit on 01293 652 500.
MMooddeell DDCCTT 11 // 22::
These models are rated
below 3kW and are connected to a
normal 13 Amp, 3-pin socket. If a
moulded-on plug is not fitted or has been
removed, the new plug should be fitted
and wired accordingly.
Connect the green/yellow wire to the
terminal and the plug marked “E”
(EARTH) or by the earth symbol, or
coloured green or green/yellow. Connect
the blue wire to the terminal marked “N”
(NEUTRAL) or coloured black. Connect
the brown to the terminal marked “L”
(LIVE) or colour red.
MMooddeell DDCCTT 33
: This model is rated 4.1Kw and is connected to a permanent wired unit.
This must be installed by a qualified electrician. Connection parts may be required.
This model must not be operated from a 13 amp supply. This models power must be
supplied via an 20A all pole isolator which provides full disconnection under over-
voltage catagory III conditions. If a power supply cord is to be used, it shall be at least
H05RN-F.
UNPACKING & INSPECTION INSTALLATION DCT3
2
INSTALLATION DCT 1 / 2
BBrreeaadd ffeeeeddeerr gguuiiddee
CCrruummbb ttrraayy
PPoowweerr OONN NNeeoonn
SSppeeeedd ccoonnttrroolllleerr
TToopp eelleemmeenntt ccoonnttrrooll
BBoottttoomm eelleemmeenntt ccoonnttrrooll
PPoowweerr SSaavveerr SSwwiittcchh
UUnnllooaadd cchhuuttee
PARTS & CONTROLS
HHeeaatt LLiimmiitt RReesseett
We have designed the controls to be as easy to
use as possible. Please familiarise yourself
with all controls before using.
Model shown DCT 2