Filter
Top Products
1st
2nd
1st
2nd
3rd
CLICK
98
BLADES & SPINDLE
Do not Use blaDes for longer than 45 seconDs at a time. Allow
processer to cool if you go over the max run time.
PROCESSING BOWLS & LID
You will always need to use the large bowl first, no matter what other bowls and
attachments you wish to use.
Before you assemble the food
processor, ensure that the
power cord is unplugged, and
placed facing you on a dry,
level surface. Push down on
the body to secure firmly.
Place the large bowl onto
the main body, with the
handle pointing to the right
(four o’clock).
Hold the handle and turn it
clockwise until you hear and
feel it lock in to place.
1
2
3
POSITION BODY
LARGE BOWL
LOCK LARGE BOWL
1
ADDITIONAL
BOWLS
When using the medium
bowl, insert this into the
large bowl. When using the
small bowl insert this into
the medium bowl.
Small bowl must be used
with the medium bowl.
CLICK
LOCK
2
ALIGN BOWLS
The medium bowl will
self-locate into the large
bowl. The groove on the
small bowl must allign with
the pip on the medium
bowl.
CLICK
LOCK
3
ATTACH LID &
LOCK INTO PLACE
To attach the lid, place it on
the large bowl aligning to
the slots on the bowl rim. To
lock, hold the large bowl
handle, and with your other
hand, hold the base of the feed
tube and rotate clockwise.
Handle blades and attachment
using only the central plastic
section.
The large chopping
blade locates directly onto
the bowl drive, once the large
bowl is locked in place.
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
The medium chopping blade
also locates directly onto the
bowl drive, once both large
and medium bowls are in
place.
The small chopping blade
needs to be used with the
spindle. This must be
attached to the bowl drive
once the large and medium
bowls are in place, and before
locating the small bowl.
1
2
3
LARGE BLADE
MEDIUM BLADE
SMALL BLADE
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
1
SPINDLE IN
LARGE BOWL
The spindle locates on to
the bowl drive on the large
processing bowl.
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
2
SPINDLE IN
MEDIUM BOWL
When using the medium
bowl, place it in the large
bowl then the spindle on the
bowl drive.
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
3
SPINDLE IN
SMALL BOWL
When using the small bowl
with blade, place in the large
bowl with medium bowl,
spindle in position, then place
the small bowl and small blade
on the spindle.