Filter
Top Products
11
OR
OR
10
GRATING & SHREDDING DISC
Do not Use Discs for longer than 45 seconDs at a time. Allow
processer to cool if you go over the max run time. Do not use Discs with Auto pulse.
Select the fine or coarse side
of the grating/shaving disc to
suit your requirement.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
OR
Place the reversible grating
disc on the spindle and push
down firmly to locate.
Place the spindle and grating
disc assembly onto the bowl
drive of large processing
bowl.
1
2
3
SELECT GRATE
LOCK ON SPINDLE
LOCATE ON BOWL
OR
3
LOCATE ON BOWL
Place the spindle and
shredding disc assembly onto
the bowl drive of large
processing bowl.
OR
1
SELECT SHRED
Select the fine or coarse side
of the shredding disc to suit
your requirement.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
OR
2
LOCK ON SPINDLE
Place the reversible
shredding disc on the spindle
and push down firmly to
locate.
VARIABLE SLICING & JULIENNE DISC
take caUtion as blaDes are sharp. Do not use with Auto pulse.
To adjust the slicing thickness,
rotate the outer spindle
anti-clockwise to make slices
thicker, or clockwise to make
thinner slices.
NOTE: Very sharp.
Hold plastic to avoid injury.
OR
Fit the slicing disc over the
spindle and press firmly into
place.
The adjustable slicing disc
can
only be used with the
large and medium bowls.
It creates any slice thickness
between 0.5mm and 7.5mm.
1
2
3
SLICE THICKNESS
LOCK ON SPINDLE
FOR LARGE &
MEDIUM BOWLS
3
FOR LARGE &
MEDIUM BOWLS
The julienne disc can
only be
used with the large and
medium bowls.
1
CORRECT WAY UP
The julienne disc must be
inserted with the cutting face
upwards.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
2
LOCK ON SPINDLE
Fit the julienne disc over the
spindle and press firmly into
place.