Filter
Top Products
empty and the door is secured) and unscrew the levelling legs to make them
longer. Screw them in tighter to make them shorter.
Note: This cooler is not designed to operate with the levelling legs removed.
Handle
Some models of wine cooler are shipped with a towel bar-style handle. To
install the handle, you will need a Phillips head screwdriver.
Look at the left side of the door frame, facing outwards. There are two small
holes in the frame. Take the handle and hold it up to the door frame so that
the holes in the handle line up with the holes in the door frame. While holding
the handle with one hand, insert a screw through the top hole in the handle
and screw it into the top hole in the door frame. Then insert a screw in the
bottom hole in the handle and screw it into the bottom hole in the door frame.
Now insert the small “caps” included into the holes in the handle.
Note: On some models, the handle can be installed in either side of the door
frame. To install the handle in the right side of the door frame, use a small flat
head screwdriver to pry the caps out of their holes and follow the above
directions.
Caution: If you do not feel comfortable making this installation yourself, have
a qualified person do the installation for you.
Bottle Capacity
Bottle capacity listed for your wine cooler is an estimated maximum capacity
based on standard 750 mL wine bottles. For any other size bottles, capacity
will vary.
Racks
Please note that the racks for your cooler have a top and a bottom. If you are
having trouble fitting the stated number of bottles in the cooler (provided you
have standard wine bottles), try flipping over one or more racks.
Also note that your wine cooler (depending upon the model) may have more
“slots” for racks than the number of racks provided with the unit.
Reversing the Door Swing
Single door wine cooler models come with the hinges factory installed on the
right side, so the door opens from the left side, swinging open to the right. The
hinges can be reversed, to swing open from the right. To reverse the hinges,
you need a flat head screwdriver and a Phillips head screwdriver.
Please call service for further instructions about reversing the door swing.
Note: dual door models do not feature reversible doors.
Caution: If you do not feel comfortable reversing the hinges yourself, have a
qualified person do it for you.
Cleaning the Air Filter
Your wine cooler has a washable air filter over the air intake in the back of the
unit. Periodically, this air filter should be cleaned. You can remove it from the
cooler and gently wash it in a solution of mild detergent and water. Make sure
it is completely dry before reinstalling it over the air intake.
Alternatively, for a quick cleaning, you can vacuum the air filter.
6