EdgeStar TWR120 Beverage Dispenser User Manual


 
Cleaning the Cooler
Turn the temperature control to “off” and unplug your cooler. Remove
all items from it (wine bottles, shelves, etc.)
Wash the inside surfaces with a mild cleaner. We suggest you use
either warm water alone, or a baking soda solution (try mixing 2
tablespoons of baking soda into a quart of water.)
Wash the wire shelves/trays (if you have them) with a mild detergent
solution.
Clean the wooden shelves/trays (if you have them) with a soft cloth and
some wood cleaner.
Wash the outside of the cooler with a mild detergent solution.
Dry any wet parts with a soft cloth.
Caution: make sure to minimize the exposure of water to any electronic or
control parts.
Extended Periods of Disuse
Your cooler can operate safely for three weeks or longer without any
adjustments. However, if the cooler is going to be left alone for several
months, you should unplug it and clean it according to the instructions above.
Pay special attention to drying the interior.
Now set the unit aside somewhere safe. You may want to crack the door
slightly to prevent mold growth or odor.
Transporting the Cooler
The ideal packaging for you cooler is its original packaging. If possible, keep
this packaging handy and repack the cooler as it was initially packed if you
need to transport it.
If you do not have the original packaging:
Make sure the cooler is turned off and unplugged.
Remove all items.
Tape down the shelves and any other loose items within the cooler.
Shut the door and tape it closed.
Transport the cooler in a secure, upright position.
Protect the outside of the cooler with Styrofoam, cardboard, a blanket,
etc.
Energy Efficiency Tips
Locate your cooler in the coolest area of the room.
Locate your cooler away from direct sunlight or any heat-producing sources.
Let any hot foods or drinks cool before placing them inside the cooler.
7