Filter
Top Products
12
Air Filter
Air Filter - The control will notify you as to when it is time to replace the air filter (every
six months). The System Status indicator will turn off and the "Air Filter" indicator will
flash. Additionally an "ALARM RESET" indicator will be displayed below the "ON/OFF"
keypad. No audible tone will sound. The air filter condition can be reset by momentarily
pressing the "ON/OFF" keypad and the alarm will then display after another six months.
Vacation/Sabbath mode:
This operating mode can be used to save energy during high cost energy periods, or
when you won't be using your appliance for an extended period of time. Vacation mode
also serves as a Sabbath mode, disabling functions and its controls in accordance
with the weekly Sabbath and religious holidays observed within the Orthodox Jewish
community. When used as Sabbath mode, you may open or close the door at any
time to access contents without concern of directly turning on or off any lights, digital
readouts, solenoids, fans, valves, compressor, icons, tones, or alarms.
When activated, the display, alarm indicators and tones, keypad touch
tones, interior lights, and all options are disabled. All keypad functions are
disabled, with the exception of the "On/Off" keypad which is required to exit
Vacation/Sabbath mode. Storage compartment temperatures are monitored
and controlled at the settings prior to entering Vacation/Sabbath mode. For
further assistance, guidelines for proper usage and a complete list of
models with the Sabbath feature, please visit the web at http:\\www.star-k.org.
To enter Vacation/Sabbath Mode (with the control out of sleep mode), press and hold the
"On/Off" keypad until the display goes past "OFF" and reads "VAC". The display will flash
"VAC" three times to acknowledge your request, then will display "VAC" continuously
until Vacation/Sabbath mode is exited. A power outage will not exit Vacation/Sabbath
mode, exiting can only be accomplished manually. To exit Vacation/Sabbath mode and
return to normal operation, press and hold the "On/Off" keypad until the control displays
the temperature.
alarm reset
on-off
Operation