Filter
Top Products
16
Maintenance
Door Alignment
The door should be parallel to the sides
and top of the appliance. If alignment is
necessary the door may be adjusted by
removing the grille, then loosening the 2
screws which secure the door adjustment
bracket on the bottom of the door (see
Figure 15a) and adjusting the door side
to side. Use a 5⁄32” allen wrench for this
procedure. (See Figure 15 below). When
finished aligning the door, tighten the
screws securely and install the grille.
If Service is Required:
• If the product is within the first year
warranty period please contact your
dealer or call Electrolux Customer
Service at 877.435.3287 for
directions on how to obtain warranty
coverage in your area.
• If the product is outside the first
year warranty period, Electrolux
Customer Service can provide
recommendations of service centers
in your area.
• In all correspondence regarding
service, be sure to give the model
number, serial number, and proof of
purchase.
• Try to have information or description
of nature of the problem, how long
the appliance has been running, the
room temperature, and any additional
information that may be helpful in
quickly solving the problem.
Remove
Toe Grille
Door should be parallel
to top and sides of
the appliance.
Bottom
of door
Door
adjustment
bracket
Loosen (don't remove)
these two screws.
Figure 15
Figure 15a