Filter
Top Products
10
Charcoal filter
• The charcoal filter should only be used if you want to use the hood in
its filtering function.
• To do this you will need an original AEG charcoal filter.
• Replacing the charcoal filter
The charcoal filters cannot be cleaned, we recommend that they
should be replaced approximately every three months or more often if
the hood is used for more than three hours per day.
• Fitting
Remove the frame b which supports the filter c by unscrewing it
from the hood a, Fig. 4.
Insert the coal mattress inside the frame and put all parts back in
their place.
• To remove proceed in the reverse order.
• Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on the
registration plate located on the inside of the unit.
• The charcoal filter can be ordered from your local AEG Service Force
Centre.
Fig. 4