Filter
Top Products
10
Setting Oven Controls
SETTING THE CLOCK
The or pad is used to set the clock. The clock may be set for 12 or 24 hour time of
day operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the
timer in the display will flash with "PF" (power failure, See Figure 1). Note: The clock
cannot be set when the oven is on.
When PF appears in the display, press or . No sound will be heard, but after 10
seconds a beep will sounds and PF will disappear.
To set the clock (example below for 1:30):
1. Press or . "CLO" will appear in the display (Figure 2).
2. Press pads to set the time of day to 1:30 (Figure 3). "CLO" will
appear in the display. Press