Filter
Top Products
11
Setting Oven Controls
To set the Timer (example for 5 minutes):
1. Press or . "0:00" will appear in the display (Figure 5).
2. Press the number pads to set the desired time in the display (example ).
Press or . The time will begin to count down with "5:00" (Figure 6).
Note: If or is not pressed the timer will return to the time of day.
3. When the set time has run out, "End" will show in the display (Figure 7). The
clock will sound with 3 beeps every 15 seconds until or is pressed.
To cancel the Timer before the set time has run out:
Press or . The display will return to the time of day.
SETTING CONTINUOUS BAKE OR 12 HOUR ENERGY SAVING
The or and or pads control the Continuous Bake or 12 Hour Energy
Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature
that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes.
The oven can be programmed to override this feature for Continuous Baking.
To set the control for Continuous Bake or 12 Hour Energy Saving
1. Press and hold or for 8 seconds (Figure1). "12Hr" or "- -Hr" will appear
in the display and the control will beep once.
2. Press or to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12Hr" in the display indicates the control is
set for the 12 Hour Energy Saving mode and "- -Hr" indicates the control is set
for the Continuous Bake feature (Figures 2 and 3).
3. Press or to accept the change (Figure 4; display will return to time of
day) or press or to reject the change.
SETTING THE KITCHEN TIMER
The or pad controls the Timer feature. The Timer serves as an extra timer in the
kitchen that will beep when the set time has run out. It does not start or stop cooking. The
Timer feature can be used during any of the other oven control functions.
Figure 5
Figure 6
Figure 7
Figure 1
Figure 2
Figure 3
Figure 4