Filter
Top Products
20
Setting Surface Controls
OPERATING THE INDUCTION COOKING ZONES
The cooktop has two induction Cooking Zones designed for cookware of various
sizes. Be sure to place cookware that meets the minimum and maximum pan
size requirements (Fig. 2, page 14) for the Cooking Zone desired and is best for
the amount of food being prepared. Place the cookware with the prepared food
on the Cooking Zone BEFORE setting any of the Cooktop controls.
To Turn ON one or more of the Cooking Zones:
1. Place the prepared food using the correct type and size cookware on the
desired Cooking Zone. Be sure to center the cookware on Cooking Zone
completely covering the minimum ring marked on the Zone surface. PLEASE
NOTE: If the cookware requirements for the Cooking Zone (See Fig. 1, page
15) are not met the sensors will detect a problem and display the letter
FF
FF
F in
the affected Cooking Zone LED. Any problems must be corrected before
proceeding.
hi
+
lo
-
hi
+
lo
-
timer
Fig. 1
2. Touch and hold the
POWER
key pad for a few seconds or until a beep sounds. The Power
Indicator light located above the
POWER
key pad will turn ON. NOTE: If no other key pad is
touched within 20 seconds the request to Power ON the cooktop will clear.
3. To start one or more Cooking Zones lightly touch the
ON OFF
key pad for the Cooking
Zones needed. A beep will sound and the chosen Cooking Zone power level digital
display will show
00
00
0 indicating no power level for the Zone has been set yet. NOTE: If
no other key pad is touched within 10 seconds the request to Power ON the Cooktop
Zone will clear.
4. Set the desired power level for the Cooking Zone by touching either the or
key pad. If the key pad is touched the Cooking Zone will start at a “Power Boost”
maximum power level (the Cooking Zone LED will display
PP
PP
P
and the control will beep
once). If the key pad is touched once the Cooking Zone will start at 1 (the
Cooking Zone LED will display
11
11
1
and the control will beep once).
NOTE: Touch once, or repeatedly touch the or key pads to adjust or scroll
through power levels at any time during the cooking process (To scroll through the
power levels quickly touch and hold the or key pads until the power level
desired is reached). Once the Cooking Zone power level has been set the food will
begin to heat at that level until the power level is manually changed. For more
information about the available Cooktop Zones power levels available see “Power
Level Settings” section below.
Recommended Surface Settings Chart
Setting Type of Cooking
P (Power Boost) Start most foods; bring water to a boil and pan broiling.
MEDIUM HIGH (8-9) Continue a rapid boil; frying, deep fat frying.
MEDIUM (6) Maintain a slow boil; thicken sauces and gravies; steaming
vegetables.
MEDIUM LOW (2 - 4) Keep foods cooking; poaching and stewing.
LOW (L) Keep warm, melting and simmering.