Filter
Top Products
Operating instructions
27
Starting a washing programme
In this fully integrated appliance the controls are located on the top of
the door. When selecting a washing programme, the door needs to be
slightly open.
1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Setting and starting the washing programme
Press the On/Off button.
The end of programme indicator light flashes.
Press the programme selection/cancel button and select the
desired washing programme. (To choose the right washing
programme see "Washing programmes" chart).
Close the dishwasher’s door, the programme will start
automatically.
Setting the "delay start" of a washing programme
Once the setting of the desired washing programme has occurred,
press the delay start button.
The corresponding indicator light turns on.
Close the dishwasher’s door, the countdown for the delay start
begins automatically.
The opening of the door will not modify or interrupt the
countdown.
Once the delay start has elapsed the programme will start
automatically.
To cancel a "delay start" in progress
Open the dishwasher’s door and press the delay start button, the
corresponding indicator light turns off.
Close the door, the set programme will start automatically.
NOTE: the start of the washing programme or the countdown
of the delay start will occur only after the closure of the door.
Until this moment it is possible to modify the selection made.
152950 74/0en 2-10-2006 10:25 Pagina 27