Installation instructions
46
The plug moulded onto the lead incorporates a 13amp BSI362 fuse.
Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The
cover/carrier is indicated by the coloured insert at the base of the
plug.
A replacement cover/carrier must be obtained from your local Service
Force Centre.
To isolate the dishwasher from mains, remove the mains plug.
Important!
The plug must still be accessible after the appliance has been
installed.
The appliance should not be connected to the electrical supply by
means of an extension cable.
In case that the electrical cable has to be replaced, please contact
your local Service Force Centre.
Warning!
A cut off plug inserted into a 13 amp socket is a serious safety
(shock) hazard. Ensure that it is disposed of safely.
152950 74/0en 2-10-2006 10:25 Pagina 46