Filter
Top Products
Operating instructions
16
If you are using dishwasher detergent that already contains rinse aid,
it is necessary to deactivate rinse aid dispenser, in order to avoid a
double dosage.
Deactivation/activation of the rinse aid dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been deactivated, the rinse aid
indicator light on the control panel is automatically deactivated.
1. Press the On/Off button. The On/Off indicator light illuminates
(setting mode).
If other indicator lights are on, this means that a wash programme
has been selected. The programme must be cancelled: press
simultaneously function buttons
22
and
33
for about 2 seconds.
All the indicator lights will turn off (except for the On/Off
indicator light and eventually salt and rinse aid indicator lights)
indicating that the set programme has been cancelled and the
machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of the function push buttons 1, 2, 3 and 4 start flashing.
3. Press function button 2, the indicator lights of function buttons 1,
3 and 4 turn off while the indicator light of the function button 2
goes on flashing, the digital display indicates the current setting.
4. To change the setting, press function button 2 again, the digital
display indicates the new setting.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
rinse aid dispenser deactivated
inse aid dispenser activated (factory setting)