Filter
Top Products
Operating instructions
28
7. Cancelling the “delay start” in progress
To cancel a delay start in progress you have to reset the dishwasher;
follow the same instructions given in "To cancel a washing
programme in progress". Cancelling a delay start involves also the
cancelling of the setted washing programme.
In this case you have to set the washing programme again.
8. End of the washing programme
The dishwasher will automatically stop.
In the digital display appears 0 (remaining programme time), only
in this case the programme has ended.
The indicator light of the programme just ended will remain on.
If the door is not immediately opened at the end of the
programme, air will circulate inside the dishwasher to prevent
residual steam recondensing on the dishes as water droplets.
This device operates intermittently for about 20 minutes, as long as
the dishwasher is switched on.
If the On/Off button is pressed or the door is opened during
these 20 minutes, the device will be automatically cancelled.
Switch off the dishwasher by pressing the On/Off button,
the On/Off indicator light turns off.
Open the door and wait a few minutes before removing the dishes;
in this way they will be cooler and the drying will be improved.
9. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should therefore be
allowed to cool down before removing from the appliance.
Empty the lower basket first and then the upper one; this will
avoid water dripping from the upper basket onto the dishes in the
lower one.
Water may appear on the sides and the door of the dishwasher as
the stainless steel will eventually become cooler then the dishes.
When the washing programme has finished, it is recommended
that the dishwasher is unplugged and the water tap turned off.