Electrolux 570 D Ventilation Hood User Manual


 
18
Relocating the control unit
(Only 570 D - 5708 D)
The control unit can be fitted at a different point (cladding,
lighting facia, etc.).
Remove the grease filter grill and the housing frame.
1. Loosen two screws and pull the control unit forwards out of the
housing. Undo the socket connection.
Caution: The socket connection cable is only long enough
for a maximum distance of 40 cm!
2. Open the cable channel on the top side of the housing and pull
the wire for the control unit through the opening. Shut the cover
so that it supports the wire.
3. Fit the fascia cover included with the appliance over the
opening for the control unit.
4. Dimensions to cut out for the control unit:
Fig. 11
Fig. 12