Electrolux 570 D Ventilation Hood User Manual


 
7
Maintenance and care
The hood must always be disconnected from the electricity
supply before beginning any maintenance work.
Cleaning the hood
Clean the outside of the hood using a damp cloth and a mild deter-
gent.
Never use corrosive, abrasive or flammable cleaning products.
Never insert pointed objects in the motor’s protective grid.
Wash the outside surfaces using a delicate detergent solution.
Never use caustic detergents or abrasive brushes or powders.
Only ever clean the switch panel and filter grille using a damp cloth
and delicate detergents.
It is extremely important to clean the unit and change the filters at
the recommended intervals. Failure to do so will cause grease
deposits to build up that could constitute a fire hazard.
Metal grease filter
The purpose of the grease filters is to absorb grease particles which
form during cooking and it must always be used, either in the
external extraction or internal recycling function.
Attention: the metal grease filters must be removed and washed,
either by hand or in the dishwasher, every four weeks.
Removing the metal grease filter
DL 4150 - CHDL 4150 - DL 6250
Press the handle that locks the grease filter first towards the
opposite side and then extract downwards. Fig. 4.
570 D - 5708 D
Fold the handles downwards and press them towards the centre.
Fig. 4.
Fig. 4
Grease filter
Handle
DL 4150 - CHDL 4150
DL 6250
Handle
570 D - 5708 D