Electrolux 570 D Ventilation Hood User Manual


 
5
Fig. 2
Description of the Appliance
The hood is supplied as an extractor unit and can also be used with
a filtering function by fitting one charcoal filter.
You will need an original AEG charcoal filter for this function
(Available from your local AEG Service Force Centre).
Extractor version
In this version fumes are extracted to the outside via a hose
connected to the coupling ring. Fig. 1.
In order to obtain the best performance the hose should have a
diameter equal to the outlet hole.
Only for model DL 4150-CHDL 4150:
Should there already be an hose of diameter 100 mm that ducts to
the outside through the walls or roof, it is possible to use the 120/
100 mm adapter. In this case the hood will be slightly noisier.
Filter Version
The air is filtered through a charcoal filter and
returned to the kitchen. Fig. 2.
You will need an original AEG charcoal filter for
the filtering function. (See Special Accessories).
Fig. 1
510
710
Coupling ring
Bayonet screw fitting
(Only 570 D - 5708 D)