Filter
Top Products
Operating Instructions
24
Deleting a wash programme
A selected wash programme can only be deleted when the door of the
dishwasher is still open, however a programme cannot be deleted in the
first 6 seconds after making a programme selection.
After 6 seconds the wash programme can be deleted as follows:
0 1. Press the button for the current wash programme and hold it pressed.
The programme indicator for the current wash programme flashes for a
few seconds and then extinguishes.
2. Release the programme button, the wash programme is deleted.
3
A selected programme is not deleted by switching off the dishwasher.
Interrupting the wash programme
(only in emergencies)
3
Interrupt a wash programme in progress only when it is absolutely
necessary to do so. For safety reasons the door of the dishwasher is
only unlocked at the end of the wash programme. Therefore, when the
programme is running, increased force is necessary to open the door to
overcome the locking mechanism. If the door is frequently opened
when a wash programme is in progress, the door lock is subject to addi-
tional wear.
In addition, when the appliance is closed again, the air that has entered
the appliance is heated and expands significantly. As result water may
penetrate into the base of the appliance and trigger the leak preven-
tion system.
1
Hot steam may escape from the appliance when opening the door.
Open the door carefully.
0 1. Open the door of the dishwasher. Since the door is locked when the
wash programme is running, more force is needed to open the door.
2. Rectify the reason for opening the appliance.
3. Close the door, again more force than normal will be required. The
selected programme will then continue.