Filter
Top Products
Operating Instructions
31
Interrupting the programme by opening the dishwasher door
1
Hot steam may escape when the door is opened. There is a risk of scald-
ing. Open the door carefully.
0 1. Open the door of the dishwasher.
The programme will stop.
2. Close the door.
The programme will continue.
Cancelling the programme (RESET)
0 1. Press the function buttons 1 and 2 simultaneously and keep them
pressed.
The programme display for the current programme will flash for several
seconds and then go out.
2. Release the function buttons.
The programme has been cancelled.
3
Turning off the dishwasher will only interrupt a selected programme,
not cancel it. The programme will restart after turning the dishwasher
back on again.
3 in 1 function
Your appliance is equipped with a special additional function that ena-
bles optimal use of 3-in-1 dishwashing tablets and whereby the addi-
tion of rinse aid and special salt is not required.
This additional function can be selected together with all dishwashing
cycles.
0 1. Place the 3-in-1 dishwashing tablet in the detergent container.
2. Switch on the appliance.
3. Press the button for the additional 3in1 function.
The indicator for the 3 in 1 function becomes illuminated.
– The addition of special salt and rinse aid from each respective supply
container is prevented.
– The displays will no longer indicate a shortage of salt or rinse aid.
4. The function can be switched on or off by pressing the 3in1 button.
The 3in1 display will indicate the current setting:
The 3in1 indicator is illuminated Function activated
The 3in1 indicator is not illumi-
nated
Function deactivated
(ex-factory setting).