Filter
Top Products
33
Water Supply Connection
• The dishwasher must be plumbed into a cold water supply.
• The water pressure must be within the limits given in the technical
specifications. Your local Water Authority will advise you on the aver-
age mains pressure in your area.
• A shut-off device with a ¾" connection must be provided on site.
• The inlet hose has a filter to remove any impurities from the water
supply and a rubber seal. When fitting ensure that the filter and seal
are correctly positioned.
1 No water must escape from the fitting after the shut-off device
has been opened.
Water Outlet Hose Connection
• Ensure the drain hose is not bent or squashed as the could prevent or
slow down the discharge of water.
• The outlet hose should be connected to a water outlet provided in a
neighboring cupboard (not directly behind the unit).
• The dishwasher is fitted with a device to prevent the back flow of wa-
ter, which allows the installation height of the unit to be above the
outlet height.
• The highest point of the drain hose should never exceed the unit
height.