Filter
Top Products
20
☞
1. Remove frozen food and wrap it in several layers of newspaper. Store it
in a cool place, well covered.
2. Switch the appliance off and remove the plug from the mains, or
switch off or turn out the circuit breaker or fuse.
3. Clean the appliance and the interior accessories with a cloth and luke-
warm water.
4. After cleaning wipe with fresh water and rub dry.
5. After everything is dry, switch to FROSTMATIC function and switch off
the audible warning signal. Immediately replace the previously
removed food in the freezer. When the red warning light goes out,
turn the FROSTMATIC function off.
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the appli-
ance once a year with a soft brush or a vacuum cleaner.
Magnetic door seal
After opening and closing the door of your freezer you will not be able
to open the door again immediately. This is because a vacuum will
have developed inside, keeping the door closed until the pressures
inside and outside the door have equalised. After a few minutes you
can easily reopen the door.
Energy Saving Tips
• Do not install the appliance near boilers, radiators or other sources
of heat. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Do not leave the door open any longer than necessary.
• Do not set temperature any colder than necessary.
• Check the storage temperature in the freezer on the temperature
display.