Electrolux 79301 KF-MN Range User Manual


 
13
STOP+GO function
When the “Stop+Go” sensor panel is actuated all cooking zones that
are switched on are simultaneously switched to the keep warm setting.
The control light for the “Stop+Go” sensor panel will illuminate. The
keep warm setting will be indicated in the display with u.
When the “Stop+Go” sensor panel is actuated again, the cooking set-
tings that were previously selected are reset and the control light goes
out.
3 The timer is not stopped by the Stop+Go function.
If an automatic warm up function was selected in the heating up
stage a this will be stopped by the Stop+Go function, and the previ-
ously selected cooking setting will be reset by actuating the “Stop+Go”
sensor panel again.
Switching off a cooking zone
1. To switch off a cooking zone touch the heat setting selector sensor
panel and simultaneously, or return the setting to zero using the
heat setting selector sensor panel .