Filter
Top Products
Operating instructions
11
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener
- end of programme
- intervention of an alarm due to malfunction
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off button. The indicator lights of the programme
selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme is set.
The programme must be cancelled: press simultaneously
function buttons 2 and 3 for about 2 seconds, the indicator light
of the set programme button starts flashing. After about 2 seconds
the indicator lights of all the programme selection buttons will
illuminate, this means that the set washing programme has been
cancelled and the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator lights
of function buttons 1, 2 and 3 start flashing.
3. Press function button 3, the indicator lights of function buttons
1 and 2 turn off while the indicator light of the button 3 goes on
flashing, the digital display indicates the current setting.
4. To change the current setting, press again function button 3, the
digital display will indicate the new setting.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
Audible signals deactivated
Audible signals activated (factory set)
152955 36/0en 11-04-2005 12:25 Pagina 11