Filter
Top Products
Operating instructions
28
5. To interrupt or cancel a washing programme
in progress
Interrupt or cancel a washing programme in progress
ONLY if it’s absolutely necessary
Attention! Hot steam may escape when the door is opened.
Open the door carefully.
Interrupt a washing programme in progress
Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point at which
it was interrupted.
Cancel a washing programme in progress
Open the dishwasher door.
Press simultaneously function buttons 2 and 3 for about 2
seconds, the indicator light of the button corresponding to the
running programme starts flashing. After about 2 seconds the
indicator lights of all the programme selection buttons will
illuminate, this means that the running programme has been
cancelled and that the machine has returned to setting mode.
If a new washing programme will be selected, check that there
is detergent in the detergent dispenser.
6. To cancel a delay start in progress
To cancel a delay start in progress you have to reset the dishwasher;
follow the same instructions given in "Cancel a washing
programme in progress". Cancelling a delay start involves also the
cancelling of the set washing programme.
In this case you have to set the washing programme again.
152955 36/0en 11-04-2005 12:25 Pagina 28